Call/Leave Menu; Menu Navigation; Parental Lock; Set Time - Mirage smartSTREAM - BOX2IP User Manual

You can select between the operation
modes TV (TV channels) and RADIO (radio
channels) as follows:
 Press the key TV/RADIO on the remote
control.
 Press again the key TV/RADIO to return to
the previous operation mode.
5.8

Call/Leave Menu

 To call the menu, press the key MENU (of
the remote control or at the receiver).
The menu is called.
The following is displayed in the headline of the
various menu windows:
1. Name of menu window
2. Current date
3. Current time
 Press the EXIT key to leave the menu or to
go back one step.
It could be possible that you have to

press EXIT several times to go back
to TV mode.
5.9

Menu Navigation

The menu items with the settings for TV and
radio can be respectively accessed in the two
operation modes TV and Radio.
 Press PR+ to select the menu item above.
 Press PR- to select the menu item below.
 Press to change resp. increase the
selected value.
 Press to change resp. decrease the
selected value.
Instead of changing a value by us-
ing the keys
 many menu items you can also
press the OK key, select a new val-
ue from the list, and confirm such
value by again pressing the OK key.
Active menu items are color-marked.
Although most settings for TV operation are
made, you can also make some further set-
tings via the menu.
5.10

Parental Lock

In the sub-menu Parental Lock you can lock
access to certain menus by using a PIN (e.g.
for protection of your settings) or block selec-
tion of certain channels by using a PIN.
Access the sub-menu Parental Lock as
follows:
1. Press the MENU key.
2. Select the menu System Setup.
3. Select Parental Lock and confirm by
pressing OK.
After entry of password, you may
−
set if access to the sub-menus is pro-
tected by password,
by selecting the Menu Lock and select-
Off On
ing or
/
−
set if certain channels are to be locked
by a PIN,
by selecting PIN and selecting
On
by using the keys
− change the password:
Select the field New Password.

Enter a new password.

Go to the field Confirm Password.

Again enter the new password.

4. Press OK to save your changes and to
leave the sub-menu.
5.11

Set Time

Reasonable operation of the receiver requires
setting of system time. By default, the receiver
Basic Operation
/ , with
by using the keys
;
Off
/
or
; or
13