Basic Operation
5.12.7.4
Switching Off Teletext
Press the EXIT or TXT key to deactivate
teletext.
5.12.8
Subtitles
If subtitles are offered for the program in
the selected channel, these can be activat-
ed as follows:
1. Press the keys TXT to open the selection
window Subtitles/Teletext.
2. Press the keys
Subtitle
and confirm with OK. Another
window Subtitle Language appears.
3. With the keys PR+ or PR- select a line
Subtitle language
tion with OK to activate subtitles. Only if
several subtitle languages are being sent
there will appear several lines
guage
. If for example only German subti-
deu(D)
tles are sent,
language.
To switch off the subtitles proceed as fol-
lows:
1. Press the key TXT to open the selection
window Subtitles/Teletext.
2. Press the keys
Subtitle
and confirm with OK. Another
window Subtitle Language appears.
3. With the keys PR+ or PR- select the line
SUB OFF
and confirm your selection with
OK to deactivate the subtitles.
5.12.9
Aspect Mode
5.12.9.1
Setting the Aspect Mode with the V-MODE
key
Press the V-MODE key several times to set
the aspect ratio. Possible values:
Auto
4:3PS
4:3LB
,
,
ble).
5.12.9.2
Setting the Aspect Mode via the Menu
Select Aspect Mode to set the aspect ratio by
using the keys
20
and
to select
and confirm your selec-
Subtitle lan-
is preset as subtitle
and
to select
16:9LB
,
(see below ta-
and
.
Value
Meaning
Default setting: the receiver selects
Auto
optimum value
For playback with a 4:3 screen, PS
= Pan & Scan:
•
4:3 program: picture is opti-
mally displayed.
4:3PS
•
16:9 program: picture height is
adjusted to screen; picture in-
formation on the right and left
are missing.
For playback with a 4:3 screen, LB
= Letterbox
•
4:3 program: picture is opti-
mally displayed.
4:3LB
•
16:9 program: picture width is
adjusted to screen; lacking
height is filled up by black
bars.
16:9
For playback with a 16:9 TV set
5.12.10
Video Resolution
5.12.10.1
Switching the Video Resolution via the
Menu
In the menu System Setup, select the
submenu TV System and confirm by
pressing OK.
1. Select the Video Resolution.
2. Press OK to display a list with the se-
lectable values.
3. Select the value appropriate to your TV set
by using the keys PR+ and PR-.
Example: If your TV set is capable of dis-
playing a resolution of 720p
should also set 720p at the receiver (720p
is the factory setting).
p = progressive scan: progressive scan images are
9
transmitted, e.g. 720p means that 50 progressive
scan images with a resolution of 1280 pixel/line and
720 lines/image are transmitted per second. i =
interlaced video: odd and even lines are transmitted
alternatingly.
then you
9
8F