Table of Contents
Advertisement
7 .
Test the connection by selecting
NOTE: The curing chamber carousel should rotate if the printer
is connected . The curing door must be shut to perform this
operation .
Activating Printer
Printer must first be activated before you can add it. You will know if the printer
needs to be activated if you go to add it and a dialog box pops up. (1)
1 .
Fill in all the fields and select Next .
NOTE: An internet connection is required to activate the printer .
2 .
The printer will now be activated through the 3DSSystems activation server .
3 .
Enter a name for the printer . Click Next .
4 .
Choose the printer and click
current) .
5 .
The printer is now ready to use .
Test Material Cartridge
Before removing label from material cartridge, test to ensure cartridge is inserted
properly .
1 .
Select Check Cartridge from the Help tab .
2 .
If cartridge is not inserted properly an error will occur .
3 .
If cartridge is okay, a window will pop up letting user know how much material
is left in cartridge . When new it will say 100% .
4 .
Once cartridge is determined to be okay, you can carefully pull back the label .
NOTE: Do not move the machine with the cartridge inside once
it is opened .
3D Systems, Inc.
Test Post Cure
from the
Set As Current
(this will set the printer as
Help
Tab . .
24
1
Hide quick links:
Advertisement
Table of Contents
