Part Names; Projector - Hitachi PJTX200J User's Manual And Operating Manual

Before use

Part names

Projector

Focus ring (22)
Exhaust vent
► Do not block or cover the
projector's vents.
► To avoid being burnt,
please do not touch areas
near the vents while the
projector is in use or
immediately after use.
Lens (9, 60)
A bright light for projecting is
emitted from the lens.
► Please do not look into the
lens while the projector is
in use.
Elevator feet (12)
Lamp cover (57)
Covers the lamp.
► The lamp has a finite
product life. Preparation
of a new lamp and
early replacement are
recommended.
Intake vent
► Do not place anything that
may be sucked into or stick
to the vents underneath
the projector.
Ports
See next page.
► Please see the
"Connecting your devices"
(13) section for more
information.
6
Zoom ring (22)
(Bottom view)
(Rear left view)
Horizontal lens shift dials (22)
Vertical lens shift dials (22)
(Front right view)
Filter cover (58)
Covers the air filter and intake
vent.
► Maintain the air filter to
ensure proper ventilation.
Elevator button (12)
Remote sensor (19)
Lens cover (9)
Strap hole (9)
Elevator button (12)
Control buttons
See next page.
Exhaust vent
► Do not block or cover the
projector's vents.
► To avoid being burnt,
please do not touch areas
near the vents while the
projector is in use or
immediately after use.
Elevator foot (12)
Elevator button (12)