Fastening The Cables - Hitachi CP-WU5500 User Manual

Setting up

Fastening the cables

Use the supplied cable tie to fasten the
cables.
Remove the screw located on the lower
side of HDMI connector and use it to
attach the HDMI cable holder.
It is recommended to fasten the HDMI cables by using the HDMI cable holder and
the Cable tie to prevent them from coming off. Use a Cable tie with the size of 2.0
x 4.0mm or smaller.
No cable tie
WARNING
CAUTION
with the size of 2.0 x 4.0mm or smaller.
cables and tie holder.
►Do not bind the cables too tightly. The cables or the hole might be damaged.
22
HDMI cable
holder
►Do not fasten the cables other than HDMI.
►To fasten the cable, use a supplied Cable tie or plastic tie
With cable tie
A metallic tie may cause damage to the
screw
cable tie