Table of Contents
Advertisement
8-2-2. Slip paper
Press the RELEASE button on the control panel in order to auto-release the paper. If the paper
cannot be removed by performing an auto-release, open the front cover, push the point A or B
on the platen, and remove the paper.
Thermal head
Caution Symbol
This symbol is placed near the slip print head to indicate that it may be hot. Never
touch the slip print head immediately after the printer has been used. Let the print
head cool for a few minutes before touching it.
This symbol is placed near the thermal print head to indicate that it may be hot.
Never touch the thermal print head immediately after the printer has been used. Let
the print head cool for a few minutes before touching it. Observe the precautions
for handling electrostatic sensitive devices.
This symbol is placed near the cutter.
Never touch the cutter blade, as you could injure your fingers.
This symbol is placed near the peripheral drive connector.
Do not connect this to a telephone.
A
– 36 –
B
Advertisement
Table of Contents
