Table of Contents
Advertisement
4-2-2. Using 57.5/75.5 mm Width Paper Roll
When using a paper roll with 57.5 or 75.5 mm width, install the supplied paper guide on the
printer.
To change the effective print width (roll paper width), change the setting at memory switch
configuration Utility. For details on the setting of the memory switches, refer to the software
manual located in the "Documents" folders on the CD-ROM.
1) Install the roll paper guide in the unit as illustrated below. To use a 75.5 mm width paper
roll, align the roll paper guide in hole [1], and to use a 57.5 mm width paper roll, align it
in hole [2].
(2) Install the roll paper guide in the unit by aligning it with the holes and grooves as illustrated
below.
Note: After using a paper roll with a width of 57.5 mm, do not change to a paper roll with
a width of 79.5 or 75.5 mm. (This is because the printer head has deteriorated as a
result of a portion of the head having been in direct contact with the platen.)
After using a paper roll with a width of 75.5 mm, do not change to a paper roll with
a width of 79.5 mm. for same reason.
[ 1 ]
[ 2 ]
– 19 –
Paper guide
Advertisement
Table of Contents
