Table of Contents
Advertisement
Caution Symbol
This symbol is placed near the slip print head to indicate that it may be hot. Never
touch the slip print head immediately after the printer has been used. Let the print
head cool for a few minutes before touching it.
This symbol is placed near the thermal print head to indicate that it may be hot.
Never touch the thermal print head immediately after the printer has been used. Let
the print head cool for a few minutes before touching it. Observe the precautions
for handling electrostatic sensitive devices.
This symbol is placed near the cutter.
Never touch the cutter blade, as you could injure your fingers.
This symbol is placed near the peripheral drive connector.
Do not connect this to a telephone.
WARNING
3 Shut down your equipment immediately if it produces smoke, a strange odor, or unusual
noise. Immediately unplug the equipment and contact your dealer for advice.
3 Never attempt to repair this product yourself. Improper repair work can be dangerous.
3 Never disassemble or modify this product. Tampering with this product may result in injury,
fire, or electric shock.
3 Do not touch the cutter blade.
• There is a cutter inside the paper outlet slot. Not only should you not put your hand in the
paper outlet slot while printing is in progress, never put your hand into the outlet even
when printing is not in progress.
• The printer cover can be opened when replacing the paper. However, since the cutter
blade is on the inside of the printer cover, be careful not to place your face or hands too
close to the cutter blade.
3 During and immediately after printing, the area around the print head is very hot. Do not
touch it, as you could be burned.
3 Since working on the cutter may be dangerous, be sure to turn off the printer first.
CAUTION
3 We recommend that you unplug the printer from the power outlet whenever you do not plan
to use it for long periods. Because of this, you should locate the printer so that the power
outlet it is plugged into is nearby and easy to access.
3 If the voltage shown on the label on the of your printer does not match the voltage for your
area, contact your dealer immediately.
3 Make sure that the printer is turned off and unplugged from the AC outlet and that the
computer is turned off before making connections.
3 Do not connect a telephone line into the peripheral drive connector.
Failure to observe this may result in damage to the printer.
Also, for safety purposes, do not connect wiring to the external drive connector if there is
a chance it may carry peripheral voltage.
– 22 –
Advertisement
Table of Contents
