Table of Contents
Advertisement
6-3. Self-Printing
6-3-1. Test Printing
• Thermal paper roll
Place a paper roll on the printer.
With the rear cover closed, turn the power switch ON while keeping the FEED button
depressed. The printer will run a test print in the following order: version number, DIP
switch settings, memory switch settings, etc.
After the test print is completed, the printer will revert to the normal mode.
• Slip paper
With the front cover closed, turn the power switch ON while keeping the RELEASE but-
ton depressed.
Insert a paper into the slip slot. The printer will automatically feed the paper; then, it will
run a test print.
The printer will run a test print in the following order: version number, DIP switch settings,
memory switch settings, etc.
After completing the test print, the printer will release the paper and revert to the normal
mode.
– 31 –
Advertisement
Table of Contents
