Table of Contents
Advertisement
10-1. General Specifications
10-1-1. Thermal Printer
(1) Printing method
(2) Print speed
(3) Dot density
(4) Printing width
(5) Number of print columns
(6) Paper feed method
(7) Paper roll
(8) Noise
10-1-2. Slip Printer
(1) Print method:
(2) Print head:
(3) Print direction:
(4) Print speed:
(5) Font type:
(6) Font configuration:
(7) Print width:
(8) Print columns:
(9) Paper feed method:
10. Specifications
Direct line thermal printing (thermal type)
Max. 2000 dots/sec. (250 mm/sec.) (normal type paper)
203 dpi: 8 dots/mm (0.125 mm/dot)
Max. 72 mm
Max. 48 columns (12 × 24 font)
Max. 64 columns (9 × 24 font)
Max. 36 columns (16 × 24 kanji font)
Max. 24 columns (24 × 24 kanji font)
Friction feed
Feed pitch 0.125 mm
Refer to chapter 5 for details on the recommended paper
roll.
Paper width: 79.5 ± 0.5, 75.5 ± 0.5, 57.5 ± 0.5 mm
Roll diameter: ø83 mm or less
Approx. 56 dB
Serial dot impact
9-pin
both
4.8 columns/sec. (7 × 9 font, continuous ANK 40 columns
printing)
(1-byte)
Alphanumeric (ANK)
Expanded graphics
International characters
(2-byte)
Kanji (level 1)
Kanji (level 2)
Special symbols
1-byte kanji
7 (half dot) × 9 or 5 × 9
85.4 mm
60 columns (7 × 9 font)
45 columns (5 × 9 font)
Friction feed
Feed pitch min. 0.176 mm (1/144 inch)
– 40 –
95 characters
128 characters × 40 page
32 characters
3,489 characters
3,388 characters
83 characters
282 characters
Advertisement
Table of Contents
