Table of Contents
Advertisement
5-2. Slip Paper
5-2-1. Specifications
(1) Width:
(2) Length:
(3) No. of copies:
(4) Total thickness:
(5) Copy slippage:
(6) Adhesive:
Note: Be particularly careful with paper that has adhesive on the left end because it might
feed diagonally.
Note:
1) Do not use paper that is curled, kinked, wrinkled, warped, or torn.
2) Do not use paper that has holes in the positions shown below, and do not print on the
back of paper that has low reflectance, because they can cause the paper sensor to
operate improperly.
68 ~ 230 mm
75 ~ 297 mm
original + 3 copies
1 sheet 0.09 ~ 0.15 mm (up to A4 portrait)
0.09 ~ 0.20 mm (up to A6 portrait)
4 sheets 0.09 ~ 0.31 mm
1.5 mm or less per 15 lines (between original and bottom-
most paper)
top-bound = good; right-bound = acceptable;
left-bound = acceptable; bottom-bound = unacceptable
37 mm
27 mm
– 26 –
8 mm
: Holes not allowed
: Printing not allowed on pa-
per with holes or reflectance
below 40%
Advertisement
Table of Contents
