Newland NL-8510 POS User Manual page 32

C.TCP TEST is not yet available.
Under the menu shown as figure 3
④
shown as figure 3-33
a、 Under the menu shown as figure 3-33, press Key "1" to enter Reset the modem
b、 Under the menu shown as figure 3-33, press Key "2" display the version information of
wireless module
c、 Under the menu shown as figure 3-33, press Key"3"display wireless signal strength
d、 Debug: Under the menu shown as figure 3-33, press Key"4"to enter the debug interface.
shown as figure 3-34
Ⅰ Response: check whether the AT response is normal .
Ⅱ Other command: using serial port tool to debug the wireless module's AT command .
e、 Under the menu shown as Figure 3-33, press Key"5" read network registration: OPS
State:0
DEAD
00000000
ESC
figure 3-32
-16, press Key "4" to enter wireless modem menu,
____MODEM API____
1 Reset 2 Version
3 Signal 4 AT response
5 Register NET
6 Init
figure 3-33
____AT COMMAND ____
1. Response
2. Other commands
figure 3-34
■ NL-8510 POS user manual
29