Newland NL-8510 POS User Manual page 23

b、Under the menu shown as figure 3-14, Press Key "2" to print the Blank Page, which is
usually used to adjust the printer head moving speed.
c、Under the menu shown as figure 3-14, Press Key "3" to print the filled page, which is a
black rectangle. It is used to detect pin missing and the equality of print result. A filled
page can also be used for testing the maximum printing electrical current.
d、Under the menu shown as figure 3-14, Press Key "4" to print a vertical strip page, which
looks like barcode
e、Under the menu shown as figure 3-14, Press Key "5" to print an invoice page
.. f、Under the menu shown as figure 3-14，Press Key "6" to print a continuous Enters Page,
which is used for testing the page moving speed.
② Under the menu shown as figure 3-13, press Key 4 to enter print status test.
Under the menu shown as figure 3-15, Press Key "1" to perform Print Status Testing,
which means to check if the printer head temperature and voltage is within normal range.
1. Get Temperature
figure 3-15 Print Status Test
■ NL-8510 POS user manual
20