4.4 Password
Setting the security protection of POS, shown as figure 4-8:
① Setting super password: you need to input this password to enter management menu. The
factory default setting is "159951".
② Setting download password: When open the PC host to download the program to POS, the
PINCODE you need to input is the download password. The correct password needs to be
entered before, the user program can be downloaded.
③ Setting functional Permission: figure 4-9, setting if super password is needed when
entering a specific menu; the factory default is no for all menus.
4.5 Auto-run
Choose if user program is auto run after boot, shown as figure 4-10:
⒈
Set supper password
⒉
Set download password
Set selftest purview
⒊
figure 4-8
1. Disabled selftest
2. Disabled magcard selftest
3. Disabled file selftest
4. Disabled Set POS Time
figure 4-9
Allow User Programme Run
Automatically?
No
⒈ Yes
⒉
figure 4-10
■ NL-8510 POS user manual
34