Display; Keyboard - Newland NL-8510 POS User Manual

Desktop pos with thermal printer

Table of Contents

4.1 Display

LCD display setting, shown as figure 4-2.:

① Contrast ratio: Setting the contrast radio of LCD, can change the definition of LCD.

Using F1 and F2 to adjust the contrast radio, then press enter and input the check code,

the operation will be successful.

② Screen flip left to right: Can make serene flip left to right

③ Screen flip top to bottom: Can make serene flip top to bottom.

④ Screen shift left: Make screen move left about half character

Key attribute set of configuration, shown as figure 4-3

① Press Key "1" to set Keyboard volume: Setting the volume of key tone. There are three

options: high, medium and low. Choose the desired option and then press enter to save

the setting

② Press "Key 2" to set Keyboard Repeat Rate, which is the input speed when one key is

being kept pressed; Choose from High, Med, and Low; Press "ENTER" to save the

setting.

1.Cont rast

2.Screen Turn Left/Right

3. Screen Turn Left/Right

4.Shift Left

figure 4-2

Keyboard Setup

1.Keyboard sound

2.Type Rate

figure 4-3

■ NL-8510 POS user manual

Table of Contents