Table of Contents
Advertisement
Display that the information function as follow:
Constant speed: Using AT command to carry out modem initialization.
Reset: There is soft reset and hard reset; soft rest is done by using AT command.
Customization: There are 3 types of registers to choose from; s7, s6 or s10; s7 means
Ⅵ.Under the menu shown as figure 3-23, press Key "6" to enter Check modem version
menu, shown as figure 3-27
Display that the information content as follows:
CONEXANT-CX86501-33600-V34: model of chip
SDLC: V2.02 means the modem communication protocol version
③Under the menu shows as figure 3-16, Press Key "3" to perform PPP test, which has a
menu shown as in figure 3-28:
____ Init MODEM____
1 Normal speed
2.Reset Modem
3.Special set
figure 3-26
the carrier wave timeout is 1s; s6 mean dial up tone waiting time
if 1s; s10 means carrier wave lost time is 0.1s.
___ MODEM VER. ___
CONEXANT － CX86501 －
33600－V34
SDLC：V2.02
figure 3-27
__ Config & Test ___
1 Wire MODEM
2Wireless MODEM
3 WLM_Dial Set
figure 3-28
■ NL-8510 POS user manual
27
Advertisement
Table of Contents
