Maintenance Task Reference Table [Ql1] - MTU 8 V 2000 M51A Operating Instructions Manual

5.2 Maintenance task reference table [QL1]

The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The
Maintenance Schedule is a stand-alone publication.
The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.
Task
W0500
W0501
W0502
W0503
W0505
W0506
W0507
W0508
W1001
W1002
W1005
W1006
W1007
W1008
W1009
W1011
W1140
W1178
Table 2: Maintenance task reference table [QL1]
148 | Maintenance | MW15550/06E 2012-02
Measures
Check engine oil level
Visually inspect engine for leaks and general condition
Check intercooler condensate drain (if fitted)
Check service indicator of air filter
Check relief bores of coolant pump(s)
Check engine for abnormal running noises, exhaust color
and vibrations
Drain water and dirt from fuel prefilter (if fitted)
Check contamination indicator reading on fuel prefilter (if fit‐
ted)
Replace fuel filter or fuel filter element
Check valve clearance
Replace air filter
Replace fuel injectors
Replace fuel injection pump(s)
Replace engine oil filter at each oil change or when the time
limit (years) is reached, at the latest
Check layer thickness of oil residue, clean and replace filter
sleeve (if fitted) during every oil change at the latest
Perform endoscopic inspection of combustion chambers
Clean wire meshes of crankcase breather
Replace pressure pipe neck in cylinder head
(→ Page 208)
(→ Page 139)
(→ Page 139)
(→ Page 139)
(→ Page 139)
(→ Page 139)
(→ Page 139)
(→ Page 139)
(→ Page 195)
(→ Page 175)
(→ Page 204)
(→ Page 183)
(→ Page 179)
(→ Page 211)
(→ Page 213)
(→ Page 168)
(→ Page 174)
(→ Page 184)