MTU 8 V 2000 M51A Operating Instructions Manual page 173

Checking diaphragms
1. Remove cover (4).
2. Take off spring (5), gasket (2) and dia‐
phragm (3).
3. Check diaphragm (3) for damage.
4. Replace diaphragm if damaged.
5. Install diaphragm (3) on housing (1).
6. Install new gasket (2) and spring (5) togeth‐
er with cover (4).
7. Tighten screws of cover (4) to specified tightening torque.
Name
Screw
8. Check diaphragms in further oil separators in the same way.
Size Type
Tightening torque
Lubricant
MW15550/06E 2012-02 | Task Description | 173
Value/Standard
6 Nm + 2 Nm