Scsi Hard Disk Drive - NEC I-Select TW100 User Manual

I-Select TS100 / I-Select TW100 User Guide - Upgrading Your System
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable to the cable power adaptor.
4. Connect the power cable adaptor to the connector on the storage device.

SCSI Hard Disk Drive

All storage devices require power and SCSI cable connections. Devices shipped with
the system are already connected.
The following procedure explains how to attach the cables to a hard disk drive.
1. Connect one of the relevant SCSI cable connectors (A) to the matching pins on
the storage device.
- Take care to prevent bending drive connector pins.
- Align the cable connector to the matching pins on the drive.
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable (B) to the power connector on the storage
device.
Figure 4 - 9 : S-ATA Hard Disk Drive
A - SCSI cable
B - Power cable
4 - 31