NEC I-Select TW100 User Manual page 87

I-Select TS100 / I-Select TW100 User Guide - Upgrading Your System
4 0 0
After the installation, set the transfer rate of the board, those of the devices
connected to the board, and other parameters by using the SCSI BIOS utility of the
SCSI controller. Refer to the document coming with the board for the details of the
settings and the procedures.
Figure 4 - 22 : SCSI Controller for Disks or Tapes
A External SCSI Connector
B Internal SCSI Connector
C Hard Disc Activity LED Connector (not used)
4 - 23