Standard Features; Pci Slots; Pci -E X16 Slot - NEC I-Select TW100 User Manual

I-Select TS100 / I-Select TW100 User Guide - System Overview

Standard Features

400W power supply
On-board LAN
AMD Athlon 64 and AMD Athlon 64FX processors support
Dual channel memory architecture support
SCSI and S-ATA hard disk drives support
DVD-ROM, COMBO DVD-ROM/ CD-RW, DVD+R9 (DL) support
PCI and PCI-E x16 video boards support
PCI-E x1 LAN board support
5.25-inch tape backup unit support
Processor
The system board may accommodate one AMD Athlon 64 processor with up to 512KB
cache or one AMD Athlon 64FX processor with up to 1MB cache.
Memory
The system board contains four 184-pin DIMM slots each supporting either DDR400
ECC unbuffered memory or DDR400 non ECC memory. You may install a minimum
of 256 MB and as much as 4 GB.
You may use either ECC or non ECC memory in your TW100
configuration. However, mixing ECC and non ECC memory is
not supported.
Your system supports dual-channel memory architecture. Refer to "Recommended
Memory Configuration" on page 4-20 for details.

PCI Slots

The motherboard has three PCI expansion slots that you can use to add a video board or
a LAN board for example.

PCI -E x16 Slot

The motherboard has one PCI-E x16 expansion slot that you can use to add a video
board.
Caution
1 - 10