System Power Cables; Cabling A Dvd-Rom, A Combo Dvd-Rom Cd-Rw Or A Dvd+R9 Drive - NEC I-Select TW100 User Manual

I-Select TS100 / I-Select TW100 User Guide - Upgrading Your System

System Power Cables

Power cables come from the power supply and are attached to standard storage devices.
System power cables vary in length and provide connector sizes to accommodate a
variety of supported storage configurations. Power cable connectors are keyed to fit
only in the correct position. The following figures respectively show the power cable
connector for an IDE storage device and the power cable adaptor for a S-ATA device.
Figure 4 - 6 : IDE Storage Device Power Cable Connector
Figure 4 - 7 : S-ATA Storage Device Power Cable Adaptor

Cabling a DVD-ROM, a Combo DVD-ROM CD-RW or a DVD+R9 Drive

All optical devices require power and IDE cable connections. Devices shipped with the
system are already connected.
The following procedure explains how to attach the cables to an optical drive.
1. Connect the IDE cable connector (B) to the matching pins on the storage
device.
Take care to prevent bending drive connector pins.
Align the cable connector to the matching pins on the drive.
4 - 29