Dismantling - Miele B 2312 Operating Instructions Manual

^ Place the iron on the iron rest to cool
down.
While the iron is cooling down, you can
dismantle the steam ironing system.
To do this, the ironing board must first
be put into its lowest working position.
Ensure that the connection cable does
not get caught and that the residual
water drawer is completely pushed in
and engaged.
^ Activate one of the dials located on
either side of the tower by turning it
towards q until it can go no further
and then hold it there.
^ At the same time, push the ironing
board down to its lowest working
position by pushing down on the
handle at the back of the ironing
board.
Do not push down on the ironing
board itself.
^ Release the dial and it will spring
back to the centre position.

Dismantling

39