Table of Contents
Advertisement
Fan
The fan is controlled using the o, p or
n, m buttons.
Only on B 2312:
Pressing the o button activates the
steam inflation function.
Pressing the p button activates the
steam extraction function.
B 2826 and B 2847:
The n button allows you to switch
between the steam extraction and
inflation functions.
Each press of the button changes the
function.
Pressing the m button switches
between the two power settings of the
fan.
Each press of the button changes the
setting.
Power setting 1 = 1 fan is active
Power setting 2 = 2 fans are active
The fans are located on the underside
of the ironing board.
Steam extraction function
The steam extraction function helps to
penetrate fabrics with steam, avoids the
formation of condensate on the ironing
board, and fixes fabrics to the ironing
board so that they do not easily slip.
Steam inflation function
The steam inflation function creates an
air cushion between the fabric and the
ironing board, thus helping to prevent
seams from being crushed.
The benefits are evident when ironing
quillings and sequined garments and
this function also enables the removal
of creases without flattening fabrics too
much.
Automatic switching-on/off
The automatic switching-on/off function
ensures that the fan starts up precisely
at the correct moment when using
steam.
After a brief run-on time, the fan stops
automatically because it is not needed
during pauses in ironing, e.g. when
clothes are being folded.
Memory function
The memory function remembers the
fan direction and power setting that
was last used.
Ironing
33
Hide quick links:
Advertisement
Table of Contents
