Steamer; Steamer (Only On B 2847) - Miele B 2312 Operating Instructions Manual

Steamer (only on B 2847)

In addition to the conventional iron, the
B 2847 steam ironing system is
equipped with a steamer.
The steamer* can also be used on the
B 2312 and B 2826 steam ironing
systems (*optional accessory).
The steamer a makes it easier to
smooth out creases in hanging items,
e.g. dresses, jackets.
It is supplied with a removable brush
attachment b which helps to lift fibres
in fabrics.
The steamer is lighter than the iron. It
does not have a hot sole plate, thus
avoiding the risk of causing shiny
patches on fabrics due to inadvertent
contact.
The steamer can even be used when
the ironing board has been dismantled.
The steamer can be connected to the
steam ironing system via the steam
connection socket.
^ Take the steamer out of the storage
compartment at the base of the
tower.
^ Disconnect the iron from the steam
connection socket on the tower.
Push the sliding switch on the steam
hose towards the back.
When disconnecting the hose, make
sure to pull on the plug, not the hose.
^ Plug the steamer's hose into the
steam connection socket.
Pull back the sliding switch on the
plug of the hose and release it after
plugging in.
You can exchange the iron and the
steamer at any time while ironing.
You do not need to switch off the
steam ironing system to do this.
After switching between the iron and
the steamer, there is a short waiting
period before steam can be used
again. This ensures that either the iron
or the steamer has heated up
sufficiently.
The steamer is ready to use when the
indicator light * illuminates on the
tower.

Steamer

35