Dismantling; Setting The Ironing Board To Its Lowest Working Height - Miele PIB 100 Operating Instructions Manual

Dismantling

Setting the ironing board to its
lowest working height
To dismantle the steam ironing sys-
tem, the ironing board must first be
set to its lowest working height. Make
sure you do not trap the mains con-
nection cable in the mechanism. En-
sure the residual water drawer is com-
pletely emptied, pushed in and locked
in place.
 Turn one of the rotary controls on the
side of the handle as far as it will go
in the  direction.
 Hold the rotary control in the  posi-
tion.
The height of the ironing board can now
be adjusted.
44
 Keep holding the rotary control in the
 direction and, simultaneously, use
the handle to push the ironing board
down as far as possible.
Do not push down directly on the
ironing board.
Use only the handle to push the iron-
ing board down.
 Release the rotary control.
The rotary control will spring back into
the centre position.
The ironing board is now at its lowest
working height and can be folded up.