Miele B 2312 Operating Instructions Manual page 44

Cleaning and care
Completing the rinsing process
44
Ensure that the metal contacts at the top of the residual
water drawer are clean and dry. It is via these contacts
that the appliance is informed when the residual water
drawer is full or fitted in the appliance. If the contacts are
wet or dirty, this information is not transmitted.
^ Wait for approx. 20 seconds before refitting the drawer in
the appliance.
The indicator light 2 goes out.
After heating up, the steam ironing system is ready to use
again.
The steam function cannot be used until the residual water
drawer is refitted.
When the indicator light * illuminates, the steam ironing
system is ready to use again.