Miele B 2312 Operating Instructions Manual page 56

Cleaning and care
^ Click the appropriate tool onto the
water filter in the same socket and
pull it out.
^ Remove the water filter from the tool.
^ Clean the water filter thoroughly
under running water.
56
^ Refit the water filter in the appliance.
Make sure that the seal on the water
filter is at the bottom.
^ Refit the seal in the socket on the
right-hand side.
^ Place the water filter cover back on
and tighten the screw.
^ Push the water container back into
the appliance.
The steam ironing system is now ready
to use again.
If the water filter is not fitted, the
steam ironing system cannot be
operated.
This will be signalled by an indicator
light (see 'Problem solving guide').
If the water container is cracked or
exhibits other damage, it must be
replaced. Only use Original Miele spare
parts. See back cover for contact
details.