4Th、 Basic Functions And Operations; Answer The Calls - ATCOM AT-620P User Manual

AT-620P User Manual
Lines
Navigation
button
Dial pad
Menu
Volume buttons
Speakerphone
button
Mute button
Headset button
Voicemail
button
4th、 Basic functions and operations

Answer the calls

1、
When there is an incoming call, AT620P will remind user with ringing. There
are 5 ways to answer the call
A、Answer by handset
Pick up the handset and talk with the caller. If you want to hang up, just put
back the handset.
ATCOM TECHNOLOGY CO., LIMITED
Shows extension number and status.
There are three colors for LED, red，yellow and orange.
If the line is registered, the LED shows yellow
If the line is enable registered but register to server failed, the LED
shows orange
If the line has income calling, the LED shows red and flicker
If the line is on the calling , the LED shows red
If the line disable for register, the LED is off.
when there is the incoming call , LED blinks, The frequency is 500ms
off,500ms on.
When have voicemail, LED shows red and flicker , The frequency is
1000ms off,1000ms on.
Allows users to navigate(left, right, up, down), on the
standby, up and down shows the network information, right
shows the lines information, left shows the call record
For entering numbers, letters or characters(not shown)
Come into Keypad menu
Adjust the volume
Pick up and hung up on the speakerphone mode, when pick
up by speakerphone, the LED of the button is on
Mute the handset, headset or speakerphone by press the
Mute button; this prevents the person on the active call form
hearing what you or someone else in the room is saying.
To cancel the Mute function, press the Mute button again.
If Mute the voice, the LED is light on this button
Pick up and hung up on headset mode. When pick up by
headset, the LED button will light
Check the Voicemail status, if there are voicemail, the button
will light