Manufacturer's Regulatory Declarations; Shielded Cables - Silicon Graphics 1600SW Owner's Manual

Manufacturer's Regulatory Declarations

For detailed regulatory information, refer to Appendix A, "Warranty
Information" at the end of this manual.
This product conforms to several national and international
specifications and European Directives listed on the "Manufacturer's
Declaration of Conformity." The CE insignia displayed on each device
is an indication of conformity to the European requirements.
Caution: This product has several governmental and
third-party approvals, licenses, and permits. Do not
modify this product in any way that is not expressly
approved by Silicon Graphics. If you do, you may
lose these approvals and your governmental agency
authority to operate this device.

Shielded Cables

The flat panel monitor is FCC-compliant under test conditions that
include the use of shielded cables. Shielded cables reduce the
possibility of interference with radio, television, and other devices. If
you use any cables that are not from Silicon Graphics, make sure they
are shielded.
The cable that attaches the flat panel monitor to your host computer or
adapter board uses additional filtering molded into the cable jacket to
reduce radio frequency interference. If your monitor cable becomes
damaged, contact your service provider.
Maintenance, Technical Specifications, and Regulatory Information EN-27