Manufacturer's Regulatory Declarations; Regulatory Label - Silicon Graphics Presenter Owner's Manual

Manufacturer's Regulatory Declarations

Table 3-1 (continued)
Non-Operating Relative humidity
Conditions
Vibration
Shock
A "Manufacturer's Declaration of Conformity" is available on the World
Wide Web. Look on the system (regulatory) label on the rear of your
workstation to determine your CMN (model) number which you will need
to identify your Declaration of Conformity.
To locate the information on the World Wide Web, enter the following in
your Web browser location window:
http://www.sgi.com/Products/compliance/index.html
Locate and print or save your Declaration of Conformity. Make a note of
your CMN number and the date on the Declaration of Conformity here for
future reference.
_________________________________________________

Regulatory Label

If you received a regulatory label with a graphics board upgrade, place the
label below the logos and over the lower portion of the regulatory label on
the rear of your workstation.
Manufacturer's Regulatory Declarations
Technical Specifications for the Presenter
5% to 90% RH, no condensation
0.02", 5-19 Hz
35 G, 5-500 Hz
20G, 11 ms, half sine wave
direction: X, Y, Z
31