Recommended Use And Viewing Angles - Silicon Graphics 1600SW Owner's Manual

Use only sensing devices that have been specifically designed to
measure LCD flat panel displays. Do not use a device that attaches to
the display screen using a suction cup; not only does this type of
device give incorrect readings but the suction cup may damage the
display.

Recommended Use and Viewing Angles

Follow these recommendations to use your flat panel monitor:
• Allow the flat panel monitor to warm up for at least a minute.
• Always have your computer's screen saver enabled to prevent
images from burning into the monitor.
• Turn the monitor off when you will be away from it for more than
a few hours. This dramatically lengthens the life span of the
monitor's backlight lamps.
• If your computer has a power-saving feature, enable it to help
lengthen the life span of the monitor's backlight lamps.
• For best color viewing, the monitor should be between 18 inches
(46 cm) and 28 inches (71 cm) away from your eyes.
• Adjust the monitor height so that the center of the screen is at or
slightly below eye level. For the brightest image and most
accurate color, view the screen as close as possible to
perpendicular (a 90° angle). See Figure 1-5. (Refer to Table 3-1 for
the viewing angle limits.)
Setting Up and Using the Flat Panel Monitor EN-11