Maintenance, Technical Specifications, And Regulatory Informationen-23; Cleaning And General Care Of The Flat Panel Monitor - Silicon Graphics 1600SW Owner's Manual

Chapter 3
3. Maintenance, Technical Specifications, and
Regulatory Information
This chapter contains information on how to take care of your flat
panel monitor, technical specifications, and regulatory information.
Cleaning and General Care of the Flat Panel
Monitor
Handle your flat panel monitor with care. A sharp instrument such as
a pen can scratch the monitor's surface and felt-tip pens can leave
permanent stains. Do not place objects on the glass surface, especially
suction devices (although Post-it notes are OK).
From time to time dust builds up on the surface of the monitor, and
you need to clean it to get the best possible image. Follow the steps
below to clean the monitor.
Use only a soft cloth, either dry or moistened with
Caution:
water. Using other substances, abrasive cleaners,
cleaning pads, alcohol, or ammonia to clean the
monitor scratches or otherwise damages the
monitor's surface. Also, do not spray directly on the
coated glass surface, because the liquid may drip
inside the unit and damage the components.
1. Dampen a soft cloth with water just enough so it does not streak.
2. Wipe the glass surface of the monitor gently with the cloth.
Maintenance, Technical Specifications, and Regulatory Information EN-23