Advanced Settings/Call Features - Grandstream Networks GXV3275 Administration Manual

ADVANCED SETTINGS/CALL FEATURES

Always Ring Speaker
Auto Conference
Disable Call-Waiting
Display Soft Keyboard
Dialer Interface Priority
Display
Dialer Interface Display
Interval (m)
Filter Characters
Firmware Version 1.0.3.6
It is used to set if the speaker to play the ringtone if the speaker
channel is not set as default channel. If set to "Yes", the phone will
force to play the ring speaker in speaker channel. The default setting
is "No". End user might need this feature when the headset is
connected.
It is used to allow the phone system to invite the all the call parties into
a conference by pressing the conf key. If it is disabled, the end user
has to add each call party to conference manually. The default setting
is "No".
It is used disable call waiting feature. If it is checked, the phone
system will reject the second incoming call during an active session
without user's knowledge. But this missed call record will be saved to
remind users. The default setting is "No".
It is used to enable the QWERTY soft keyboard in the phone
app/dialer page. If it is set to "Yes", the soft keyboard will pop up by
tapping the input box. The default setting is "No".
It is recommended to disable the dial plan of the dial page on the
Account Settings page, or the call may fail if dial characters not
conform to the dial plan.
It is used to force the phone system to enter the dialer page on the
LCD screen. If it is enabled, the phone LCD will display the dialer
interface automatically from LCD screen idle mode (screen saver
mode or screen sleep mode). It needs coordinate with Dialer Interface
Display Interval setting. The default setting is "No".
It is used to configure the timer for the Dialer Interface Priority Display.
The timer will be started from the LCD screen goes to idle mode
(screen saver mode or screen sleep mode). If the Dialer Interface
Priority Display feature is enabled, the phone LCD will display the
dialer interface automatically from LCD screen idle mode (screen
saver mode or screen sleep mode) after the timer expired.
If it is configured with 0, the phone LCD screen will display the dialer
interface when user wakes up the phone from the screensaver mode
or screen sleep mode whatever the last apps is running. It needs
coordinate with Dialer Interface Display. The default setting is 1.
It is used to set the characters for filter when dial out numbers. Users
could set up multiple characters. For example, if set to "[()-]", when
dial (0571)-8800-8888, the character "()-" will be automatically filtered
GXV3275 Administration Guide Page 63 of 103