Bluetooth Settings - Grandstream Networks GXV3275 Administration Manual

Ip multimedia phone for android

Hide thumbs Also See for GXV3275:

User manual (189 pages)

Administration manual (119 pages)

Quick installation manual (27 pages)

Table Of Contents

100

101

102

103

104

105

page of 105

/ 105
Contents
Table of Contents
Bookmarks

Table of Contents

Enter SSID, Security type, password and set up address type (DHCP/Static IP/PPPoE) in the

prompt dialog. The phone will reboot with Wi-Fi network connected.

 WPS Push Button. Press MENU button

secure Wi-Fi network setup. Once selected, check your router and press the Wi-Fi Protected

Setup (WPS) button on the router so that the Wi-Fi connection and security can be automatically

set up between the phone and the router. The phone should get network connection shortly after

successfully setup.

 WPS Pin Entry. Press MENU button

Wi-Fi network setup. Once selected, a randomly generated PIN number will show on the phone for

you to enter it on your Wi-Fi router. The setup can take up to 2 minutes to complete and the phone

should get network connection once done.

 Wi-Fi Direct. This is to set up peer-to-peer connection between two Wi-Fi Direct devices so that

they can share data and sync files. Press MENU button

devices". Then tap on the available peer device to initiate connection.

 Advanced Settings. Press MENU button

Network Notification: If enabled, the phone will show notification on the top status bar indicating

an open network is available. By default it's enabled.

Avoid Poor Connections: If enabled, Wi-Fi network won't be used unless the connection is good.

By default it's disabled.

MAC address: This shows the MAC address of the phone.

IP address: This shows the IP address of the phone from Wi-Fi network.

For more information about how to use Wi-Fi on the GXV3275, please refer to the following link:

http://www.grandstream.com/products/gxv_series/gxv3275/documents/gxv3275_wifi_guide.pdf