Advanced Settings/Call Features - Grandstream Networks GXV3275 Administration Manual

ADVANCED SETTINGS/CALL FEATURES

Always Ring Speaker
Virtual Account Group Avaya
Mode
Auto Conference
Disable Call-Waiting
Display Soft Keyboard
Always Display Dialer
Interface
Dialer Interface Display
Interval (m)
The Desktop Menu as On
Hook Dial
Firmware Version 1.0.3.46
It is used to set if the speaker to play the ringtone if the speaker channel
is not set as default channel. If set to "Yes", the phone will force to play
the ring speaker in speaker channel. The default setting is "No". End
user might need this feature when the headset is connected.
It is used to combine the first three accounts as a virtual group to place
and answer calls. This feature is designed for the Avaya customer.
It is used to allow the phone system to invite the all the call parties into
a conference by pressing the conf key. If it is disabled, the end user
has to add each call party to conference manually. The default setting
is "No".
It is used disable call waiting feature. If it is checked, the phone system
will reject the second incoming call during an active session without
user's knowledge. But this missed call record will be saved to remind
users. The default setting is "No".
It is used to enable the QWERTY soft keyboard in the phone app/dialer
page. If it is set to "Yes", the soft keyboard will pop up by tapping the
input box. The default setting is "No".
It is recommended to disable the dial plan of the dial page on the
Account Settings page, or the call may fail if dial characters not
conform to the dial plan.
It is used to force the phone system to enter the dialer page on the
LCD screen. If it is enabled, the phone LCD will display the dialer
interface automatically from LCD screen idle mode (screen saver
mode or screen sleep mode). It needs coordinate with Dialer Interface
Display Interval setting. The default setting is "No".
It is used to configure the timer for the Dialer Interface Priority Display.
The timer will be started from the LCD screen goes to idle mode
(screen saver mode or screen sleep mode). If the Dialer Interface
Priority Display feature is enabled, the phone LCD will display the
dialer interface automatically from LCD screen idle mode (screen saver
mode or screen sleep mode) after the timer expired.
If it is configured with 0, the phone LCD screen will display the dialer
interface when user wakes up the phone from the screensaver mode
or screen sleep mode whatever the last apps is running. It needs
coordinate with Dialer Interface Display. The default setting is 1.
This is used to set the dial-up type to on-hook dial or off-hook dial via
the dialing button on desktop. The default setting is "No", which means
click on the dialing button to access dialing screen to initialize off-hook
GXV3275 Administration Guide Page 71 of 117