Maintenance/Device Manager - Grandstream Networks GXV3275 Administration Manual

MAINTENANCE/DEVICE MANAGER

HDMI Control
AE Mode
Disable Missed Call Backlight
Key Backlight
Disable Missed Call Indicator
Disable MWI Indicator
Disable New Message
Firmware Version 1.0.3.6
It is used to set if allow the phone system to enable the HDMI output
and the HDMI mode if it is activated. It can be selected from the
dropdown list.

Close HDMI Output: The phone system will shut down the
HDMI port.

HDMI Display Synchronization with LCD: The connected
HDMI device will mirror the LCD display.

Show Opposite Screen: The connected HDMI device will play
the remote party's video during a video call. The rest displays
are mirror the LCD screen.
The default settings is "HDMI Display Synchronization with LCD".
AE mode (Automatic Exposure) has two options "Dark Environment"
and "Bright Environment". Users could select the mode according to
the actual environment (dark or bright) where the camera is being
used. The phone's camera settings including exposure, brightness,
contrast and Gamma value will be automatically adjusted to achieve
better visual effect under the selected environment. The default
setting is "Bright Environment".
If set to "Yes", the LCD screen won't be turned off after screen timeout
when there is unchecked missed call on the phone. The default
setting is "No".
It is used to configure the backlight for the touch keys on the
GXV3275. Users can select "Change with LCD brightness", "Always
Bright" or "Always Dark". The default setting is "Change with LCD
brightness", which mean it will turns off if the LCD is off and turns on if
the LCD is back on.
It is used to set if the phone system will turn off the LCD backlight
when there are new missed call logs on the phone. If it set to "Yes",
the LCD backlight will be turned off if the phone system has new
missed call log. Otherwise, the LCD backlight will keep on. The default
setting is "No".
It is used to set if the phone system will turn on the LED indicator at
device's upper right corner when there are unread Voice Mails. If it set
to "Yes", the LED indicator will keep off if the phone system receive
SIP NOTIFY message about unread voice mail. Otherwise, the LED
indicator will be turned on. The default setting is "No".
It is used to set if the phone system will turn on the LED indicator at
GXV3275 Administration Guide Page 86 of 103