Grandstream Networks GXV3275 Administration Manual page 51

Auto-filling Pickup Feature
Code
Pickup Feature Code
Line-seize Timeout
Firmware Version 1.0.3.6
it is set to "Yes", the user could tap the SCA account to barge into an
active session with another shared line. The default setting is "No".
It is used to set if the phone system will add the configured feature
code to retrieve parked calls. If it is set to "Yes", the "Pickup Feature
Code" configured will be automatically prepended on the phone's dial
pad when retrieving the parked call. The default setting is "Yes". This
option will be active only if "Special Mode" is set to "Broadsoft" and
"Enable SCA" is set to "Yes".
Configure the pickup feature code for call park. If "Auto-filling Pickup
Feature Code" is set to "Yes", this pickup feature code will be
automatically filled in on the phone's dial pad when picking up the
parked call. This option is used when "Special Mode" is set to
"Broadsoft" and "Enable SCA" is set to "Yes".
For Shared Call Appearance, phone must send a SUBSCRIBE
request for the line-seize event package whenever a user attempts to
take the shared line off hook. "Line Seize Timeout" is the line-seize
event expiration timer. The default value is 15 seconds. The valid
range is from 15 to 60.
GXV3275 Administration Guide Page 49 of 103