Lcd Gauge - Arctic Cat 2015 WILDCAT TRAIL/XT Operator's Manual

LCD Gauge

1. Left Button - Shifts top display
through speedometer, RPM, and
clock.
2. Middle Button - Shifts middle display
through speedometer, RPM, clock,
odometer, trip 1, trip 2, and engine
hours.
3. Right Button - Shifts bottom display
through coolant temperature, battery
voltage, intake air temperature, and
fuel level.
4. Speedometer/Tachometer/Clock Dis-
play - Indicates approximate vehicle
speed in MPH or KM/H when speed-
ometer function is selected, RPM
when tachometer function is selected,
or time when clock is selected. Press
the Left Button to change which
parameter is being displayed. With
speedometer selected, press and hold
the Left Button to shift between stan-
dard (MPH/miles/Fahrenheit) and
metric (km/h/kilometers/Celsius).
With the clock mode selected, press
and hold the Left Button to set the
clock. The option of selecting the 12-
hour or 24-hour clock is available;
press the Left Button to alternate
between the two modes. Next, press
the Middle Button to set the clock.
Press the Left or Right to set the
hours; then press the Middle Button
to set the minutes. Press the Left or
Right Button to set the minutes.
When the proper time has been set,
press the Middle Button to return to
the main gauge display.
5. Engine Hour Meter/Odometer/Trip
Meter/Speedometer/Tachometer/
Clock Display - Displays engine
hours, odometer, trip meter, speedom-
eter, tachometer, or clock. Press the
Middle Button to change which
parameter is being displayed. The
Engine Hour Meter and Odometer
cannot be reset. To reset the trip
meter, select the Trip Meter; then
press and hold the Middle Button
until the trip meter display reads 0.
WT103A

NOTE: The engine hour meter will
not activate until engine speed
exceeds 500 RPM.

NOTE: An item can only be dis-
played in this position if it is not
already being displayed in the top
display. To set the clock when the
clock is in this position, press and
hold the Middle Button; then use
the procedure found in 4.
6. Coolant Temperature/Battery Voltage/
Intake Air Temperature/Fuel Level
Display - Displays coolant tempera-
ture, battery voltage, intake air temper-
ature, and fuel quantity. Press the Right
Button to change which parameter is
being displayed. Press and hold the
Right Button to see the actual values
associated with the mode selected.
Continued operation with high engine
temperature may result in engine
damage or premature wear.

NOTE: High engine RPM, low vehi-
cle speed, or heavy load can raise
engine
engine RPM, reducing load, and
selecting an appropriate transmis-
sion gear can lower the temperature.

NOTE: Debris in the engine com-
partment (or packed between the
cooling fins of the radiator) can
reduce cooling capacity. Using a
garden hose, wash the radiator and
the engine to remove any debris
preventing air flow.
CAUTION
temperature. Decreasing
29