Spark Plugs - Arctic Cat 2015 WILDCAT TRAIL/XT Operator's Manual

Arctic cat 2015 wildcat trail/xt offroad vehicle
Table of Contents

Advertisement

8. Stand well away from the dead bat-
tery and start the vehicle with the
good battery. Allow the vehicle to run
for several minutes applying some
charge to the dead battery.
9. Start the vehicle with the dead bat-
tery and allow it to run for several
minutes before disconnecting the
jumper cables.
10. Remove the jumper cables in oppo-
site order of hook-up (4, 3, 2, 1). Be
careful not to short cables against
bare metal.
NOTE: Have the battery and elec-
trical system checked prior to oper-
ating the vehicle again.

Spark Plugs

This vehicle comes equipped with speci-
fied spark plugs. See the specifications
chart for the correct spark plugs. A light
brown insulator indicates that the plug is
correct. A white or dark insulator indicates
that the engine may need to be serviced.
Consult an authorized Arctic Cat dealer if
the plug insulator is not a light brown
color. To help prevent cold weather foul-
ing, make sure to thoroughly warm up the
engine before operating.
To maintain a hot, strong spark, keep the
plug free of carbon.
Before removing the spark plug, be sure
to clean the area around the spark plug. If
you do not, dirt could enter engine when
removing or installing the spark plug.
Adjust the gap (see specifications chart)
for proper ignition. Use a feeler gauge to
check the gap.
46
When installing the spark plug, be sure to
tighten it securely. A new spark plug should
be tightened 1/2 turn once the washer con-
tacts the cylinder head. A used spark plug
should be tightened 1/8 - 1/4 turn once the
washer contacts the cylinder head.
AIR INLET PRE-FILTER
This vehicle is equipped with a foam pre-
filter to filter dirt from the inlet air prior
to reaching the main air filter.
NOTE: To access the pre-filter,
remove the filter cover on the
driver's side
.
1. Remove the two cap screws securing
the filter to the cover.
ATV-0051
2. Fill a wash pan with a non-flammable
cleaning solvent; then dip the foam
element in the solvent and wash it.
ATV-0052
WT028A
WT105Aq2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2015 wildcat sport2015 wildcat xtWildcat trail/xt

Table of Contents