Table of Contents
Advertisement
Error messages in the display
Your fax machine indicates operating errors or does not carry out a function in accordance with your
requirements. Before you contact customer service, consider a moment and identify the error message in the
following list. You will probably then be able to remedy the fault yourself.
General procedure to be followed for error messages in the display
1. Analyse error message.
2. Rectify cause of error.
3. Press STOP key to cancel error message in display.
4. If necessary, switch off fax machine for 10 seconds and press STOP key again.
All error messages are retained in the display until they are acknowledged with the STOP key. If
this error message does not disappear, the cause of the error has still not been rectified.
Display
BROKEN REGISTRATION
POWER FAILURE
SCANNER COVER OPEN
TOP COVER OPEN
ENTRY MEMORY FULL
MEMORY OVERFLOW
DOKUMENT JAM
UPPER PAPER EMPTY
Cause
Alphabet memory and internal
settings have been lost due to a
lengthy power failure
Contents of the image memory
have been lost following a
power failure.
The copy flap is not locked in
place.
The upper part of your fax
machine housing has not
snapped into position.
The fax number entry memory
(one-touch/direct dial number
memory) is full.
The transmission / reception
memory is full.
Documents have jammed in the
document feeder.
(Only in conjunction with
additional paper cassettes)
No more paper in the upper
cassette.
How to correct
Press the STOP key. If the error message
does not disappear, activate the
installation procedure (see
confirm all settings.
The internal lithium battery is possibly
depleted.
The mains error report (see
printed out in order to provide you with a
list of lost criteria.
Allow this cover to snap carefully into
position.
Close the housing cover carefully.
Delete fax numbers you no longer need,
in order to free up memory.
Send your document(s) with a lower
resolution, or send them using the direct
mode (see
page
42).
If this error persists, please contact your
dealer for a memory expansion.
Follow the instructions on
rectify the document jam.
Load new recording paper (see
139
page
12) and
page
102) is
page 146
to
page
10).
Advertisement
Table of Contents
