Table of Contents
Advertisement
120 Retain jobs
If a job cannot be transmitted because for instance the partner fax is busy, your fax machine attempts to redial
the number at regular intervals of approx. 3 minutes*. After the XXth* redialling, the job will be automatically
deleted from the stack and a transmission report (see
such a job use this procedure. Each job will then be available for a certain time (1-24hours). If this job can not
be successfully sent during this period it will be deleted automatically from the memory.
Every time you retain a job in memory your fax prints out a transmission report (see
how long this job will be retained in memory.
To send retained jobs see
*) Depending on setting (see
If too many documents are retained in memory, the fax memory will become full since every retained job
requires memory.
If you find that the memory is frequently too small, ask your dealer for a memory expansion!
. . . . .
. . . . .
START
STOP
page
60.
page
107)
15-MAR-00 WED 19:56
RESIDUAL MEMORY 100%
1.COMM. OPTIONS
2.LISTS
3.INITIAL SETUP
4.DEFAULT SETTINGS
RECOVERY TRANSMIT
1.ON
2.OFF
RECOVERY TRANSMIT
STORED TIME=(01-24)
page
92) will be printed out. To prevent the deletion of
Standby mode
Start the menu
The first 4 menu items are displayed.
Select a menu item
Make your selection
for retain job
Select a menu item
Make your selection
for retaining time
(preset retaining time is displayed)
06
Input retaining time
-and/or-
confirm with START
Press STOP , return to standby mode
page
92) to inform you
Advertisement
Table of Contents
