Table of Contents
Advertisement
The various transmission reports and related options:
TX REPORT
Transmission report printed out after every transmission in the "direct transmission
mode" (see
installed.
Setting:
• Always printed out
• Printed out only if transmission is errored
MEMORY-TX
Printed out after every memory transmission. Print-out in A5 format also possible with
REPORT
single-sheet feed installed.
Setting:
• Always printed out
• Printed only if transmission is errored
• Printed with/without image of document
MULTI-ADD
Printed out after entire broadcast has been completed. Setting:
REPORT
• Always printed out
• Printed only if transmission is errored
• Printed with/without image of document
MULTI POLL
Printed out after entire multiple polling has been completed. Setting:
REPORT
• Always printed out
• Printed only if transmission is errored
• Never printed out
RELAY ORG.
This list is generated by a relay as soon as the document has been transmitted to the
REPORT (Relay
relay machine. The relay settings are based on this list.*
TX list of the
• Always printed out
relay originator)
• Printed only if transmission is errored
RELAY STN
This list is generated by the relay machine as soon as the document has been
REPORT (Relay
transmitted to the end machines. This list is equivalent to a group transmission
TX list of the
report.*
relay machine)
• Always printed out
• Printed out only if transmission is errored
RELAY END
This list is a copy of the "Relay TX list of the end machine". If the relay box is installed
REPORT (Relay
accordingly, this list is faxed to the relay originator following completion of the relay
TX list of the end
transmission. *
machine)
• Always printed out
• Printed only if transmission is errored
• Never printed out
*) For more detailed information, please refer to the brochure: "Mailboxes and Relays".
page
42). Print-out in A5 format also possible with single-sheet feed
91
Advertisement
Table of Contents
