FP optimail Installation Manual page 27

Issue
optimail does not
recognize the MASTER
or data cards
TELESET aborted
Other errors ...
Tips for dealing with issues occurring during commissioning
Possible cause and remedy
Card is inserted incorrectly.
Remove the card. Insert the card in the card reader
again (chip facing the rear!).
The card contains no valid data. Insert a card with valid
data.
Card is defective. Call Service.
An error message with troubleshooting information
appears in case of TELESET procedure issues. You
must repeat the loading procedure before you can
start metering with the optimail. To do this:
• Press .
• Select TELESET.
Or
• Turn off the optimail. Wait one minute.
• Turn the optimail on again.
The optimail starts the loading procedure.
Please read the Operator Manual for further
information regarding the TELESET topic.
See Operator Manual.
If you cannot remedy an error yourself, please call
Service.
27