Step 8: Connecting The Optimail - FP optimail Installation Manual

Step 8: Connecting the optimail
Modem cable
Connection cable
Antenna terminal
Power connection
Installing and commissioning optimail
Warning! Use only the power and modem
cables provided with the optimail or approved
by Francotyp-Postalia.
Make sure that cables are not damaged.
Connect the optimail only to a grounded
single-phase power socket. Make sure your
office power supply conforms to the power
requirements shown on the optimail's serial
number plate.
Make sure the socket for connecting the
optimail is close by and easily accessible at
all times.
If you are using the internal modem:
• Plug the modem cable into the modem
socket on the postage meter. The modem
socket is at the rear of the postage meter.
The spring on the plug must face
downwards.
• Connect the modem cable to the telephone
socket (analog). This is where you would
connect a fax machine.
If you are using the GSM Modem (optional) :
• Set up the GSM Modem according to the
enclosed manual.
• Plug the connection cable to the serial
interface of optimail and to the GSM
Modem.
• Plug the AC adapter of the GSM Modem
into a grounded single-phase power
socket.
Make sure your office power supply con-
forms to power requirements shown on the
AC adapter's serial number plate.
13