Zero-Rated Postal Imprint - FP optimail Installation Manual

Zero-rated postal imprint

Your optimail is ready for operation when commissioning has been completed
successfully. We recommend that you make a trial run now.
• Press .
• Use the arrow key
page.
• Use the multi function keys to select:
IMPRINT MANAGEMENT
RATED POSTAL IMPRINT.
optimail sets the 'Zero-Rated Postal Imprint'.
• Place an empty envelope or a folded sheet
on the letter catch tray:
– side to be printed face up
– the top edge must touch the letter guide.
• Push the envelope in direction of the arrow
until the optimail feeds the envelope. The
illustration shows the approximate position
where the optimail starts feeding the letter.
A roller pushes the envelope against ribbon
and print head as soon as the letter sensor
detects the envelope. Printing starts. The
optimail prints and ejects the imprinted
envelope to the right.
The optimail prints a normal meter imprint
with the postage value '00.00' (zero-rated
postal imprint).
End 'Zero-Rated Postal Imprint'
• Keep the key pressed (approx. 2 sec-
onds), until the display again shows the
symbol for product selection / set-
ting the postage value in the top right.
Please read the Operator Manual for further
information on how to operate the optimail.
Zero-rated postal imprint
to scroll to the next
ZERO-
25