Table of Contents
Advertisement
User's Manual | 42
4.2 Device
The Device sub-menus are Register, Camera, PTZ and Audio.
4.2.1 Register
Network cameras should be registered in the NVR in order to transmit video. The Register menu allows the NVR to search for
network camera easily. Cameras can be found in the local network by clicking the 'Search' button if cameras are connected.
When cameras are searched, the user can assign the searched network camera a target channel of NVR by "Add to Camera
list". If an added camera channel needs to be changed, please use the "CH" drop down menu and select desired channel.
The user can also search and register cameras manually in a WAN condition. To do so, assign the channel, IP address, login
ID, and Password. The most important information is the RTST URL information from the network cameras. If the network
cameras support dual stream, you are able to set up a secondary stream.
4.2.2 Camera
Users can setup camera title and covert-motion area. "Covert" is a feature that is used to hide a channel from view.
Users can setup a camera on each channel by clicking Channel '01 ~ 04' button.
Advertisement
Table of Contents
