Ptz Operation - Nuvico np p402 User Manual

User's Manual | 18

3.4 PTZ Operation

The PTZ menu will only be available when a PTZ camera is connected to NVR.
The user can go to PTZ mode by right clicking the mouse and selecting "PTZ" in the pop-up menu as shown below or by
selecting the joystick button in the menu bar located on the bottom of the main screen. The PTZ mode will only be
activated while in full screen when a PTZ camera is connected.
In PTZ mode, the user can control the PTZ operations with a USB mouse.
While pressing the left button of the mouse, the user can drag the mouse pointer up/down or left/right to move the pan/tilt
position of the camera. If the user moves the mouse pointer far away from the center position of the main screen, the PTZ
camera will increase its pan/tilt speed. The user can also zoom-in/out by rolling the wheel of mouse up or down.
N
OTE PTZ functions are available by using the USB mouse and the IR remote control.
For focus control in PTZ screen mode, the user can right click the mouse to get the pop-up menu as shown below. The
default mode is to "ZOOM". The user can select "FOCUS" to switch the wheel function of mouse from zoom-in/out to focus.
This will change the default behavior of the mouse wheel.
The user can also select the preset button or exit PTZ screen mode.