3.Under ActiveX ensure the following are set to enabled
Run ActiveX and plug-ins – Enabled
Download Signed ActiveX Control – Enabled
Script ActiveX controls marked as safe for scripting – Enabled
4.Set the following to "Prompt"
Download unsigned ActiveX Control – Prompt
Initialize and script ActiveX controls not mark as safe – Prompt
5. Click OK and Apply and OK. Restart the browser.
You should now be able to run the ActiveX control on the website
Users can get into web monitoring after log in as shown below. In order to connect to the NVR, the user has to click
" Connect " button which is located at the top left corner.
User's Manual | 60