Nuvico np p402 User Manual page 54


DNS Server
Enter the IP address of the Domain Name Server. There are two DNS settings. (The preferred DNS and the alternative DNS)
*You should enter the DNS Server information in order to use the internet. (Provided by your ISP)

Switch Setting
When PoE option is applied, the user can put the camera into a PoE port directly. The network setting for a PoE port will be
designed independently. This IP range should not be the same range as the NVR IP address.

TCP/IP Port
Enter the port number to use when connecting locally or remotely.

Web Port
Enter the port number to use when connecting from the Web Browser.
N
OTE TCP/IP Port, Web Port should be a different number from each other.

UPnP (Universal Plug and Play) and Auto Private IP Setup (NAT Traversal)
UPnP stands for Universal Plug and Play, which is a relatively new technology that indicates a universal protocol for
widespread plug-and-play devices to ease the network implementation. When a PC and an NVR both support the UPnP
function, the PC can automatically recognize the NVR in the same local area network. The advantage of this function is that a
PC can connect to the NVR directly by clicking on the icon representing the NVR in the <My Network Places> folder as shown
below. The first five characters of the file name of a detected NVR is subject to a firmware version.
Simply double click on the desired icon. Then, it will open an internet browser that connects to the NVR via the remote control
software as shown below. Please type in your User ID and Password to login and click 'Connect' button to connect.
User's Manual | 52